Sale!

Smraza 10 Pcs 9G Micro Servo Motor Kit

$23.55

Description

  • Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm Helicopter Airplane Car Boat Control, Arduino Project
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 microseconds
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
  • Please Note: The starting current of the motor should be over than 1A. Comes with 1 year warranty and lifetime technical Support

    About Smraza:
    We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. We have a professional engineering team dedicated to providing tutorials and support to help you get started.
    If you have any technical questions, please feel free to contact our support staff via Amazon.

    Smraza 10 Pcs 9G Micro Servo Motor for RC Robot Arm Helicopter Airplane Car Boat Remote Controls and Arduino Experiments

    Product Specification

    1. Apply Environmental Condition:
    Operating Temperature Range: -10℃~50℃
    Operating Voltage Range: 4.8V~6.0V

    2. Dimensions:
    23mm*12.2mm*29mm(L*W*H)

    3. Electrical Specification (Function of the Performance): Operating speed (at no load): 0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
    Running current (at no load): 400±30mA (4.8V ) 500±30mA(6V)
    Stall torque (at locked): 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
    Stall current (at locked): 1300±40mA (4.8V ) 1600±50mA(6v)
    Idle current (at stopped): 6±1mA (4.8V ) 6±1mA(6v)
    Running life(at no load): >350000 Turns(4.8V ) >320000 Turns(4.8V )

    4. Mechanical Specification:
    Limit angle:200°± 1°
    Weight:9 ± 1 g
    Connector wire gauge:#28 PVC
    Connector wire length:250 ± 5 mm
    Spline:21T
    Horn type:Cross,star and bar-type
    Excessive play:≤0.5°

    5. Control Specification:
    Control system:Change the pulse width
    Amplifier type:Analog controller
    Operating trave:l120°±10° (900→2100 μsec)
    Left&Right travelling Angle deviation:≤ 6°
    Centering deviation:≤ 1°
    Neutral position:1500 μsec
    Dead band width:7 μsec
    Rotating direction:Counter Clockwise (900→2100μsec)
    Pulse width range:900→2100 μsec
    Maximum travel:About 120° (900→2100 μsec)