Description
SoloGood Baby Ape Pro 142mm 3 Inch FPV Racing Drone 2-3S With AIO F4 Flight Controller Camera for FPV Beginners
- Baby Ape Pro fpv racing drone adopts 142mm carbon fiber fpv Racing frame, designed for professional pilots
- With three color Propellers, Gemfan 3016(yellow/black/purple)
- Equipped with CADDX ANT camera, 1/3″ CMOS, resolution: 1200TVL
- Without Battery, Charger, Receiver or Remote Control. It supports receivers with both SBUS and ELRS
- If you have any questions, write to us, we will provide the best customer service.
SoloGood DarwinFPV Baby Ape Pro 142mm 3 Inch 2-3S FPV Racing Drone
142mm Racing Frame Kit
- Wheel base: 142mm
- Frame arm thickness: 2.5mm
- Other thickness:1.5mm
- Frame kit material: 3K carbon fiber
AIO 4 IN 1 15A BLHeli_S ESC
- Input voltage: 1-3S LiPo
- Continuous current: 15A
- Pe ak current:17A (10S)
- BEC output: no
- Main control chip:EFM8BB21
- Firmware upgrade: Supports Dshot600/Oneshot125
- MOS: 3*3
F411 AIOFlight Controller
- Main control chip: STM32F411
- Sensor: MPU6000 or ICM20689
- Integrated OSD
- PPM/DSM/IBUS/UAR share: UART1-RX
- Mounting holes distance: 25.5*25.5mm
- Supports Betaflight firmware
CADDX ANT FPV Camera
- Resolution:1200TVL
- mage Sensor: 1/3″ CMos Sensor
- Input: DC 3.7-18V
- TV System: PAL/NTSC
FPV Video Transmitter
- 5.8G 40CH 0mW/25mw/200mw switchable VTX:
- Supports TBS SmartAudio
- Channel: 40CH
- Full video format: NTSC/PAL
- Input voltage: 7V~24V
- Power dissipation: +12V/600MW
- Size: 25×20×6mm
- With copper pipe mini antenna (ipex antenna)
3016 3-blade propeller
- Material: PC
- Mounting hole: 1.5mm
- Center thickness: 5.5mm
- Yellow propeller *2 pairs+Black propeller *2 pairs+Purple propeller *2 pairs
Motor:1104 4300KV 2-3S Brushless Motor
Lipo Battery:(Not included)
- Recommend 2-3S 300-450mah
Note:Comes without battery, charger, receiver or remote control.