ZTW 80A Brushless ESC with 5.5V/5A Switch BEC output



  • Super smooth, accurate and programmable throttle linearity and throttle response.
  • Over temperature protection ,low voltage cut off protection ,signal loss protection and so on.
  • Strong BEC output 5A/5.5V continuous and peak to 7A.
  • Supporting high RPM motors and programmable by programming card and transmitter .
  • High efficiency with low resistance and low heat MOSFET and CPU.

    Edition:80A ESC

    Key Features :
    Aluminum heat sink to lower ESC heat.
    Adjustable soft start according to different RPM and Pole Motor.
    Supporting High RPM and Pole Motor.
    Functions programmable : Brake,cut off voltage,softstart,motor direction etc.

    Description :
    Connector Soldered : 1 x XT60 for power side ,3 x 3.5mm female for motor side.
    Size :56mm x 30mm x 14mm (LxWxH).
    Battery : 2-6S Lipo / 5-18NC.
    Voltage : 7.6V-22.8V.
    Current :80A ,peak 90A (10 seconds MAX).
    BEC output : 5A/5.5V, peak 7A
    Weight :82 g.
    Motor Type : Brushless (no brushed)
    RPM support:200,000 for 2 P ,82,000 for 6 P,42,000 for 12 P.

    Q1,Did not run multiple motors ?
    A1: Different brands of motors need different start up power ,
    So you can program the “start up strength” of the ESC by programcard or Transmitter.

    Package includes :
    ESC x 1
    User Manual x 1

    Note !!
    Please do make the throttle calibration for the first time using or changed the TX.